ATSC 3.0, Broadcast Gateway, NextGen TV, Redundancy Switch, ATSC Scheduler, PTP Master, Test Measurement, Cloud Service Solution, Broadcast solution, Automotive solution

See Our Reliability!
Test & Measurement.

AMM300

Overview
AMM300 is a convenient DTV signal generator supporting MPEG2, MPEG4 TS, ETI RF signal and especially added ATSC3.0 standard and IP stream.
It supports most of DTV standards, mobile TV standards, digital radio standard in one unit including ATSC 3.0, ATSC 1.0, Open Cable,
DVB-T, DVB-C, DVB-S, DVB-S2, DTMB, ISDB-T(SBTVD), CMMB, DAB, DAB+, T-DMB and DVB-T2. Under ATSC 3.0, AMM300 supports direct RF signal generation with STL-TP stream and Multiplex function. AMM300 is remotely controlled by RCS100 which may be useful function for manufacture line. DVB-C2, DVB-S2X will be supported in the future.
AMM300 - Digital TV & Digital Radio Signal Generator
  • Main Features
    ■ Modulator : Multi Standard Support
    - ATSC3.0, ATSC, OpenCable, DVB-T2, DVB-T, DVB-C, DVB-S, DVB-S2, DTMB, ISDB-T(SBTVD), CMMB, DAB/DAB+/T-DMB
    ■ RF Output Frequency : 50MHz ~ 1.002GHz
    ■ Remote Control by RCS100
    ■ Automatic Modulator setting from TS, MFS, ETI, T2MI
    ■ Manual Modulator Setting
    ■ ATSC3.0 function
    - STL- Stream support
    - L1 setting & PLP setting support
    - Multi sub-frame support
  • General Information
    ■ Resolution : 1280 x 1024
    ■ Power supply : AC 100 to 240V, 50/60Hz
    ■ Power consumption : Less than 400W
    ■ Operating temperature : 10 to 40 ℃
    ■ Operating humidity : 20 to 85% RH (No Condensation)
    ■ Guaranteed temperature : 15 to 35 ℃
    ■ Guaranteed humidity : 20 to 85% RH (No Condensation)
    ■ Storage temperature : -40 to +70 ℃ / 20 ~ 85% RH
    ■ Operating environment : Indoor
    ■ Operating attitude : Around 2000m
    ■ Over-voltage category : II
    ■ Pollution degree : 2
    ■ Dimensions : 423 (W) x 345.5(H) x 243(D) mm
  • RF Specification
    ■ Output Connector : N Type
    ■ RF Output Frequency : 50MHz ~ 1.002GHz
    ■ RF Frequency Resolution : 1kHz
    ■ Frequency Accuracy : 3 x 10-6 / 25 ℃
    ■ RF Power Level : 0 ~ -110dBm
    ■ RF Level Resolution : 0.1dB steps
    ■ RF Level Accuracy : ±0.5dB relative to the level at 18-33 ℃
    ■ RF Impedance : 50 Ω
  • Compatibility with AMM Studio
  • System Diagram